Paint your rig with a roller for $50.00

[Pacifier]

Rollered or spray?

Sprayed with Rattle cans. 

 

[freeriders98]

so you used the spray bedliner? What brand?

 

[coreman23]

so you used the spray bedliner? What brand?

x2, and how much did you use?

 

[Pacifier]

Plati-kote Truck Bed Liner is the only truck bed liner aerosol available in colors. This textured spray permanently bonds with the bed surface and withstands extreme hot and cold temperatures.  Non-fading and will not warp or crack. Gasoline resistant. Compatible with original factory paint surface and metal, iron and steel. Truck bed liner may lift or wrinkle a non-original factory finish.

Application Tips:

    * Truck bed should be pressure washed and rinsed.
    * Wipe all areas with Wax and Grease Remover.
    * Sand all surfaces with #80 - 180 grit sandpaper.
    * Wipe all areas again with Wax and Grease Remover.
    * Mask all surrounding areas to avoid over spray.
    * Allow 24 hours before using truck bed.
    * See label for complete instructions.
    * Approximate Coverage: 10 square feet per can.
    * A full size pick-up will require 8 cans.

 

[coreman23]

It looks a ton better than the flat black spray I used. Thanks!!!!

 

[Jeremiah]

Odd question here - did it help reduce engine / exhaust heat, or road noise?

 

[Pacifier]

Odd question here - did it help reduce engine / exhaust heat, or road noise?

Odd answer...  [smirk]  I usually run my Jeeps / Zuk's with only the bikini top all year round, so I have no idea.  All I usually hear is tires and wind.