Many moons ago I had a thread of all the random car/shop related things I was up to.
It was kinda nice to have a place online to stash some pictures and whatnot and was also just some random content that some showed some interest in.
So in no particular order or any sense at all , here will by my pics and posts of utter randomness.
This is a small block Chevy I rebuilt and a turbo kit I fabricated for it. Fits a square body 2wd truck.
Started off as a 97 l31, i put a super simple cam in. Cam required cutting the spring pockets down and I used the ovate wire ls1 style spring. Cam is .545 x .550 224x232. Heads are the Vortech heads, rings were gapped at .028.
Turbo is a 62mm unit and a modified Holley for blow through. Engine turned out good, results should be pretty soon to follow. Got it running in the truck last week.
View attachment 00m0m_7rntNphOF6y_1200x900.webpView attachment 00t0t_cA1b91mJW9l_1200x900.webpView attachment 00U0U_5BNC3GsESta_1200x900.webp
And this is the next one. I'm putting together a simple 5.3 for a square body truck. It will be turbocharged with a 4l80 and running Microsquirt ecu for control
Gen4 rods, lc9 pistons, Melling pump, ls7 lifters, 243 heads, all the simple but good stuff. Turbo will be a 7875 billet and the convertor will be an A-1t around 3k stall.
View attachment IMG_1908.webpView attachment IMG_1919.webpView attachment IMG_1933.webpView attachment IMG_1934.webpView attachment IMG_1915.webp
It was kinda nice to have a place online to stash some pictures and whatnot and was also just some random content that some showed some interest in.
So in no particular order or any sense at all , here will by my pics and posts of utter randomness.
This is a small block Chevy I rebuilt and a turbo kit I fabricated for it. Fits a square body 2wd truck.
Started off as a 97 l31, i put a super simple cam in. Cam required cutting the spring pockets down and I used the ovate wire ls1 style spring. Cam is .545 x .550 224x232. Heads are the Vortech heads, rings were gapped at .028.
Turbo is a 62mm unit and a modified Holley for blow through. Engine turned out good, results should be pretty soon to follow. Got it running in the truck last week.
View attachment 00m0m_7rntNphOF6y_1200x900.webpView attachment 00t0t_cA1b91mJW9l_1200x900.webpView attachment 00U0U_5BNC3GsESta_1200x900.webp
And this is the next one. I'm putting together a simple 5.3 for a square body truck. It will be turbocharged with a 4l80 and running Microsquirt ecu for control
Gen4 rods, lc9 pistons, Melling pump, ls7 lifters, 243 heads, all the simple but good stuff. Turbo will be a 7875 billet and the convertor will be an A-1t around 3k stall.
View attachment IMG_1908.webpView attachment IMG_1919.webpView attachment IMG_1933.webpView attachment IMG_1934.webpView attachment IMG_1915.webp