Zuki4x4
Well-known member
Hi all,
In lieu of zuki stuff, I also attempt to keep my other cars up...
One is an '06 Magnum and recently started throwing codes related to the o2 sensors...
Replaced the ones in question and then it started throwing "Catalyst performance low" codes...
Well shoot...Here we go... [lol]
I kinda knew the passenger side manifold was cracked being I could hear a puff sound (Been this way for a while now) so I decided to replace both manifolds and get the "bolt on/direct fit" CA legal cats.
After digging in, found both manifolds were cracked
Man, it is TIGHT in the engine bay and was a little tricky, but dropping the entire exhaust was the only way...
I also went ahead and added all new (4) o2 sensors just for fun...
Also, I have an RT (V8) cat back exhaust (on my V6 SXT) and had to use pipe reducers on the transition...(Did this mod many years ago).
Anyway, the transition was leaking so I added some "muffler tape" and cinched it down
Any how, here is some pics of my work this weekend.
'Nuff said, all is swapped out and in, just need my emissions widget to go green (in my Torque app/BT OBD reader) then I will be ready for SMOG this December :
In lieu of zuki stuff, I also attempt to keep my other cars up...
One is an '06 Magnum and recently started throwing codes related to the o2 sensors...
Replaced the ones in question and then it started throwing "Catalyst performance low" codes...
Well shoot...Here we go... [lol]
I kinda knew the passenger side manifold was cracked being I could hear a puff sound (Been this way for a while now) so I decided to replace both manifolds and get the "bolt on/direct fit" CA legal cats.
After digging in, found both manifolds were cracked
Man, it is TIGHT in the engine bay and was a little tricky, but dropping the entire exhaust was the only way...
I also went ahead and added all new (4) o2 sensors just for fun...
Also, I have an RT (V8) cat back exhaust (on my V6 SXT) and had to use pipe reducers on the transition...(Did this mod many years ago).
Anyway, the transition was leaking so I added some "muffler tape" and cinched it down
Any how, here is some pics of my work this weekend.
'Nuff said, all is swapped out and in, just need my emissions widget to go green (in my Torque app/BT OBD reader) then I will be ready for SMOG this December :
Attachments
-
20210320_161107.webp81.5 KB · Views: 118
-
20210320_161103.webp97.3 KB · Views: 116
-
20210320_095622.webp212.4 KB · Views: 112
-
20210320_144539.webp78 KB · Views: 111
-
20210320_144535.webp68.6 KB · Views: 112
-
20210319_181403.webp58.9 KB · Views: 111
-
20210319_192222.webp63.2 KB · Views: 113
-
20210319_173823.webp181.2 KB · Views: 113
-
20210319_173830.webp254.5 KB · Views: 113
-
20210319_195655.webp250.6 KB · Views: 111