Removing sheared hub bolts

HUMZUKI

HUMZUKI

Well-known member
I just installed a locker and cromoly shafts up front an sheared off the hub bolts within 10 min of testing it out and wheeled all day in 3WD last sunday ::)

I never have much luck with easyouts so I figured the Rotor was screwed anyway so I just took my dremel to the bolts and unscrewed them with a flat head.... DONE in like 5 min.
 

Attachments

  • Picture-1.webp
    Picture-1.webp
    21.2 KB · Views: 340
HUMZUKI said:
They sheared off pretty deep thats the only reason I had to make such wide cuts
Click to expand...

FYI. I do not know what year this happened, but i know some suzuki wheel hubs and lock outs came drilled for dowl pins and had them installed. I have had both styles, and it seems more often then not they are set up for dowls. That would increase the strength of your hubs significantly.

Also ARP studs for a toyota fit the suzuki axle if you are so inclined, or you can do what i did, and drill your hubs for 7/16 alloy allen head bolts. My hub bolts are as big as the wheel studs now.
 

https://www.helpavetshine.us/help-a-vet-shine
Back
Top Bottom