BLKZUKI
Well-known member
This is not hard at all, Iam using a 2 wire GM alt some people use a 1 wire but i chose a 2 wire.
I dont have have any pics of taking the old mount off, so just take all the old stuff off mount the new bracket and alt on and belt. I had to have the bolt on the bottom of the alt very loose so i could get the belt on tighten the bolt back up once you get the belt on.
Then you can start to wire it up the colors i have on my connector were red and brown, red alt wire goes to black wire with a white stripe, and the brown wire goes to white wire with the red stripe.
Then hook up the cable that goes to the battery it is very close to the motor mount but its not touching,
then set the belt tension once that done and you make sure everything is tight fire it up i used a volt meter to make sure it was charging the battery and it was.
Now your done, hope this helps
I dont have have any pics of taking the old mount off, so just take all the old stuff off mount the new bracket and alt on and belt. I had to have the bolt on the bottom of the alt very loose so i could get the belt on tighten the bolt back up once you get the belt on.
Then you can start to wire it up the colors i have on my connector were red and brown, red alt wire goes to black wire with a white stripe, and the brown wire goes to white wire with the red stripe.
Then hook up the cable that goes to the battery it is very close to the motor mount but its not touching,
then set the belt tension once that done and you make sure everything is tight fire it up i used a volt meter to make sure it was charging the battery and it was.
Now your done, hope this helps
