Desert Zuks
Well-known member
For the last 2 days I've been fighting a jammed up T-Case Flange nut. Would have been easy until a buddy broke a flat head in the nut. Well I had some flat stock strap lying around and made this thing.
First one I made only grabbed 1 side of the flange. This cause the T-Case to twist under pressure. If you make one; make sure you make it so it grabs from both sides of the flange top and bottom. You will have to notch both arms that you will attach on the underside of the flange. The flange skirt will get in the way. Slide your handle in a long pipe and Bam no more flange nut headaches.
Easy build, just thought I'd throw it out there. Everyone has a retarded friend
that hooks you up every now and then..
[red_s]
First one I made only grabbed 1 side of the flange. This cause the T-Case to twist under pressure. If you make one; make sure you make it so it grabs from both sides of the flange top and bottom. You will have to notch both arms that you will attach on the underside of the flange. The flange skirt will get in the way. Slide your handle in a long pipe and Bam no more flange nut headaches.
Easy build, just thought I'd throw it out there. Everyone has a retarded friend
that hooks you up every now and then.. [red_s]
