Early pathfinder seats and hardbody seats

[Nonebetta]

they fit with only drilling 2 holes. width is exactly the same as sammy seats but fron to back is off by 1.5 inches. i mounted the rear of the tracks to the pathy seat and drilled new holes 13 5/8 center to center. the only problem i found was the E-brake lever. the drivers seat is pushed a little into it. i'm gonna try to move the lever over to center it between the seats. i'll post pics later once i get the passenger seat in.

 

[ZUKIMON]

Great news, now give us some pics.   Also, what years will work, and which year truck did they come from? I may know where I can get my hands on a Hardbody for the seats.

 

[Nonebetta]

no pics as of yet (other problems need more attension) the seats are out of a 93 pathfinder. ALL bucket seats from an 86.5-97 Hardbody and first generation pathfinder will work. i did notice that the right of the drivers seat (left on the passenger side) needs to be raised up. when i have all the details worked out i will have a better writeup and pics.