custom power steer set up

J

jimbo jones

Member
I needed a power steer pump for the zook but and I got hold of a std A/C pump and bracket so I decided to make a set up out of the 2 I welded a piece of 10mm flat bar to the a/c bracket which I bent in the press to suit then I got a EA falcon power steer pump  and made a bracket to hold it  the end result

DSC04196.jpg


DSC04197.jpg
 
zooky said:
I have that same pump, mine tends to run hot. For me, hydraulic assist would help it perform better
Click to expand...

I run a 2 pass oil cooler on the low-pressure side. Keeps my fluid from boiling on 35" (running stock kick pump).

Is that string on there to hold parts up, or to make sure the pulleys are aligned?
 
Jeremiah said:
I run a 2 pass oil cooler on the low-pressure side. Keeps my fluid from boiling on 35" (running stock kick pump).

Is that string on there to hold parts up, or to make sure the pulleys are aligned?
Click to expand...

I'm running a auto trans cooler holds about 2 liters to cool the power steer
and yes the string was there to line the pullys up

jimbo
 

https://www.helpavetshine.us/help-a-vet-shine
Back
Top Bottom