Skip to main content

Topic: wiring a new bumper... (Read 4568 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
  • ack
  • [*][*][*]
wiring a new bumper...
there have been a lot of posts on the forums recently about how to wire a new Samurai bumper using three-wire stop/turn/tail fixtures. Invariably the answer given is to use a trailer converter. That is usually followed by a bunch of posts complaining that the trailer converter didn't work...

I created a "Factoid" page at Ack's FAQ on this subject. It contains wiring information along with color wiring diagrams that will, hopefully, help folks understand the hows and whys of Samurai bumper light wiring!

Here is the direct link:

http://www.acksfaq.com/RBTC-Factoid.htm

I hope that this helps!
Ack

'88 Samurai, '88 Samurai tintop, '14 Ford Transit Connect. />Ack's FAQ - nearly 600 searchable links to Suzuki SJ, LJ,  Escudo/Vitara/Sidekick/Vitara and Jimny information!